Soft99 Fusso Coat 12th Wax Sealant for Dark

Description

Soft99 Fusso Coat 12th PTFE Sealant Anti-corrosion Waterproof for Dark Color Car
Characteristics:
•
Protection against scratches with strong water-repellent effect and strong covering for up to 12 months protection.
• After use if the car gets wet or dirty, all you need to is simply wipe a damp towel, and the car will begin to shine again.
• Prevents ageing of the painted surface and emergence of rust.
• Reduces the harm done by exhaust gases and an acid rain to a paint and varnish covering.
• Does not pass ultra-violet beams which can be the bottom layers of paint if the colour of the car has been changed.
Fusso Coat contains fluorine, it does not allow dirt and water traces to remain on the surface, water and dirt just wash away.
After application the care of the car becomes very simple just by washing the car with clean water, drying and rebuffing with a soft polishing micro fibre cloth.
Thanks to special structure it reduces the harm done by exhaust gases and an acid rain to a paint covering -  and protects from a set of various chemical reagents. It does not pass ultra-violet beams which can be the bottom layers of paint if the car has been repainted over the years.
It is very simple to use Soft99 Fusso Coat 12 month Wax, and can be re applied in the same way by means of the sponge supplied and you will be able accurately apply where you need to.
Neither dirt or an unpleasant smell will remain on your hands.
Your car will be reliably protected from aggressive factors of environment for up to 12 months depending on weather conditions.
On average one pot of Soft99 Fusso 12 Month Coat Wax is enough to polish 4 cars(sedan B, C class).
Method of application:
•
Wash your car with a good quality car shampoo and ideally a micro fibre wash mitt. Rinse with clean water and use a good quality drying towel making sure car is dry before using the wax. Degrease the surface of the car.
• Please do not apply the wax in direct sunlight or in dusty conditions as you could scratch the bodywork.
• After drying the car, apply  the wax with the sponge provided and apply a thin even coat on the panel in a circular motion without applying too much pressure.
• Let the wax dry to a haze for no more than 5 minutes in the Summer and 10-15 min in the winter.
• Buff the panel clean with a soft micro fibre polishing cloth using forward and backward strokes. This should be very easy to do without applying too much pressure on the cloth.
• When the car becomes dirty over time, wash car as before using use a micro fibre wash mittt and a good quality car shampoo. Again use a micro fibre polishing cloth as before but on its own and the shine will be restored.
Attention:
After using the wax on a car, for best results please try and not drive the car for 7-8 hours.
If conditions allow and for best results, please do not wash the car with shampoo for a week, only use water.
Full polymerization of a polish makes 7 days.
Precautions:
• Only use on paint work.
• Do not use on plastic bumper’s, glass rubber trim.
• Don't use during a strong wind where there is a lot of a dust.
• Efficiency will be less if the car has been repainted or if the paint coat is cracked,worn out paint or if it is in bad condition.
• Best stored in temperatures lower than 40C.
Structure: Polish, Fusso pitch, solvents on the basis of oil.